TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 693 of 1158

TM 9-2320-366-20-5

20-77. M1083/M1093 TANK AND PUMP UNIT TIEDOWN KIT INSTALLATION/REMOVAL

This task covers:

a. Installation

b. Removal

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Cargo bed side panels and stakes removed (TM

9-2320-366-10-1).

Tools and Special Tools

Sling, Cargo (Item 31, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque 0-175 lb-ft (Item 58, Appendix C)

Materials/Parts

Pin, Cotter (20) (Item 277, Appendix G)

Lockwasher (4) (Item 90.1, Appendix G)

Personnel Required

(2)

WARNING

Ensure vehicle is on level ground prior to

installation or removal of tank and pump

unit.

Failure to comply may result in

serious injury or death to personnel or

damage to equipment.

a. Installation.

NOTE

Four middle turnbuckles are assembled the

same way. One middle turnbuckle shown.

(1) Position clamp half (1) in shackle (2).

(2) Position clamp half (3) in shock mount (4).

(3) Install clamp half (1) in clamp half (3) with spring collar

(5) and pin (6).

Change 1

20-467