TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 728 of 1158

TM 9-2320-366-20-5

20-502

Change 2

20-79.

DIGITIZATION KIT INSTALLATION

This task covers:

a.

Installation

b.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1)

Batteries discounted (para 7-57)

Power distribution panel removed (para 7-11

WTEC II, para 7-13 WTEC III)

Kick panel removed (para 16-3)

RH seat removed (para 16-15)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque (0-200 Lb-in) (Item 59, Appendix C)

Wrench Set, Socket (Item 51, Appendix C)

Materials/Parts

Plastic Cable Ties (Item 69, Appendix D)

Sealant (Item 55.1.1 Appendix D)

Personnel Required

(2)

a. Installation.

(1)

Position drivers storage box (1) in cab.

(2)

Apply sealant to threads of six screws (2).

(3)

Position six washers (3) and screws (2) in drivers

storage box (1).

(4)

Tighten six screws (2) to 70-85 lb-in. (8-10 N•m).

(5)

Snap webbing (4).

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.