TM-9-2320-366-20-5

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-5 - Page 826 of 1158

TM 9-2320-366-20-5

Section II. MAINTENANCE PROCEDURES

23-2. PRIMARY AND CENTRAL TIRE INFLATION SYSTEM (CTIS) AIR HOSES

REPLACEMENT

This task covers:

a. Hose Locations

b. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive

Tape (Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Cap and Plug Set (Item 14, Appendix D)

a. Hose Locations

WARNING

Wear appropriate eye protection when working under vehicle due to the possibility of falling

debris. Failure to comply may result in injury to personnel.

CAUTION

Cap or plug hose connections to prevent contamination. Failure to comply may result in damage to

equipment.

NOTE

• This task shows locations of primary air supply and CTIS air hoses on the vehicle. It will not be necessary

to remove all hoses at one time.

• Tag hoses and connection points prior to removal.

• Note location of plastic cable ties prior to removal.

• Remove plastic cable ties as required.

• Inspect air hoses and fittings for cracks, kinks, nicks, stripped threads and cuts. Replace damaged parts.

23-2