TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 1035 of 1591

TM 9-2320-366-34-1

2-888

Change 1

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (TM 9-2320-366-20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

STE/ICE-R (Item 70, Appendix B)

Multimeter, Digital (Item 41, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B)

Wrench Set, Socket (Item 85, Appendix B)

Material/Parts

Wire, Elect, 50 ft (Item 97, Appendix C)

References

TM 9-4910-571-12&P

Personnel Required

(2)

1.

WARNING

CAUTION

Read WARNING and

CAUTION on

following page.

START

TEST OPTIONS

Continuity Test or

STE/ICE-R Test #91

REASON FOR QUESTION

KNOWN INFO

POSSIBLE PROBLEMS

Replace transmission external

wiring harness (para 6-7).

YES

NO

Faulty transmission external

wiring harness.

Faulty transmission internal

wiring harness.

Faulty F solenoid.

Faulty WTEC III Transmission

ECU.

Circuit breaker OK.

Batteries OK.

WTEC III cab transmission

harness OK.

Is continuity present from

connector P119-F to

connector P67-E?

If continuity is not present,

transmission external wiring

harness is faulty.

c74. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE

43 SUB CODE 21 (SERIAL NUMBER 6510032369 AND HIGHER)