TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 220 of 1591

TM 9-2320-366-34-1

Change 1

2-83

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter

to connector P119-r.

(3)

Connect negative (-) probe of multimeter

to external wiring harness 31-pin

connector pin U and note reading on

multimeter.

(4)

If continuity is not present, replace

transmission external wiring harness

(para 6-7).

(5)

Connect positive (+) probe of multimeter

to connector P119-r.

(6)

Connect negative (-) probe of multimeter

to all other pins in connector P119 and

note reading on multimeter.

(7)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(8)

If continuity is present, transmission

external wiring harness is shorted; replace

transmission external wiring harness

(para 6-7).

(9)

Connect connector P119 to connector

J119.

(10)

Position front grille on cab with washer

and screw.

(11)

Position two washers and screws in front

grille.

(12)

Tighten screw to 48-60 lb-in. (5-7 N·m).

(13)

Tighten two screws to 24 lb-in. (3 N·m).