TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 250 of 1591

Change 1

2-113

TM 9-2320-366-34-1

RESISTANCE TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter

to pin 1 of turbine speed sensor.

(3)

Connect negative (-) probe of multimeter

to pin 2 of turbine speed sensor and note

reading on multimeter.

(4)

If resistance is less than 200 ohms or

greater than 400 ohms, replace turbine

speed sensor (para 6-5).

(5)

If resistance is between 200 and 400

ohms, replace WTEC II TEPSS

(TM 9-2320-366-20-4).

(6)

Connect internal wiring connector TSS

to turbine speed sensor.

(7)

Install cover on control valve module

with four screws.

(8)

Install control valve module (para 7-10).

(9)

Connect external wiring harness 24-pin

connector to internal wiring harness

24-pin connector.

(10)

Tighten screw in external wiring harness

24-pin connector.

(11)

Connect batteries (TM 9-2320-366-20-3).