TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 733 of 1591

TM 9-2320-366-34-1

2-590.2

Change 1

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Personnel Required

(2)

KNOWN INFO

1.

TEST OPTIONS

Visual Inspection

REASON FOR QUESTION

YES

NO

Replace C solenoid (para 7-7)

and continue with step 2.

WARNING

CAUTION

Read WARNING and

CAUTION on

following page.

START

POSSIBLE PROBLEMS

Faulty C solenoid.

Faulty control valve module.

Faulty WTEC II TEPSS.

Are control valve solenoid

preformed packings

damaged or are valves

stuck or sticking?

If control valve module

solenoid preformed packings

are free from damage and

valves are not stuck or

sticking, C solenoid is faulty.

Transmission oil level OK.

Main oil pressure low.

C3 oil pressure low.

Repair control valve module

(para 7-11).

c47A. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN

CODE 55 AND ANY SUB CODE