TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 852 of 1591

Change 1

2-707

TM 9-2320-366-34-1

CONTINUITY TEST

(1)

Remove control valve module (para 7-10).

(2)

Remove four screws and cover from

control valve module.

(3)

Disconnect internal wiring harness

connector B from B solenoid.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter

to internal wiring harness 24-pin connector

pin B1.

(6)

Connect negative (-) probe of multimeter

to internal wiring harness connector B

pin A and note reading on multimeter.

(7)

If continuity is not present, replace

transmission internal wiring harness

(para 7-13).

(8)

Connect positive (+) probe of multimeter

to internal wiring harness 24-pin connector

pin B1.

(9)

Connect negative (-) probe of multimeter

to all other pins in internal wiring harness

24-pin connector, except pins B2 and E1,

and note reading on multimeter.

(10)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(11)

If continuity is present, transmission

internal wiring harness is shorted; replace

transmission internal wiring harness

(para 7-13).