TM-9-2320-366-34-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 1 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-1 - Page 982 of 1591

TM 9-2320-366-34-1

Change 1

2-837

CAUTION

CONTINUITY TEST

Use care when disconnecting transmission

internal wiring harness connectors. Failure

to comply may result in damage to equipment.

(1)

Remove valve body cover (para 8-2).

(2)

Disconnect transfer case wiring harness

connector H from H solenoid.

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter

to transfer case connector pin A.

(5)

Connect negative (-) probe of multimeter

to transfer case wiring harness connector

socket A.

(6)

If continuity is not present, replace

transfer case wiring harness (para 8-2).

(7)

Connect positive (+) probe of multimeter

to transfer case connector pin A.

(8)

Connect negative (-) probe of multimeter

to all other pins in transfer case connector

and note reading on multimeter.

(9)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(10)

If continuity is present, transfer case

wiring harness is shorted; replace transfer

case wiring harness (para 8-2).