TM-9-2320-366-34-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-2 - Page 1084 of 1434
TM 9-2320-366-34-2
13-424
Change 2
13-48.
M1088 FRAME PLATE REPLACEMENT (WITH FRAME RAIL KIT)
This task covers:
a. LH Removal
b. LH Installation
c. RH Removal
d. RH Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Fifth wheel assembly removed (para 13-46).
Rear axle bogie shaft removed (para 10-4).
Rear torque rods removed (para 14-5).
Resilient mount and mechanical stops removed (TM
9-2320-366-20-4).
Platform and bracket replacement/repair (unmodified)
(TM 9-2320-366-20-4 para 14-8)
Platform and bracket replacement/repair (modified)
(para 14-14).
Tailpipe and bracket replacement (para 5-4).
Intermediate axle shook absorbor bracket
replacement (para 14-8).
Muffler support bracket replacement (para 13-44).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Torque 0-150 lb-in. (Item 91, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Nut, Self-Locking (3) (Item 173, Appendix F) (LH
side)
Nut, Self-Locking (2) (Item 173, Appendix F) (RH
side)
Lockwasher (Item 166, Appendix F)
Nut, Self-Locking (Item 202, Appendix F)
Nut, Self-Locking (8) (Item 212, Appendix F)
Bolt (13) (Item 2, Appendix F)
Nut, Self-Locking (13) (Item 204, Appendix F)
Nut, Self-Locking (2) (Item 210, Appendix F)
Nut, Self-Locking (4) (Item 211, Appendix F)
Adhesive (Item 10.1, Appendix C)
Grommet, Nonmetallic (Item 71.1, Appendix F)
Personnel Required
(2)
a.
LH Removal.
(1)
Remove two self-locking nuts (1), bolts (2), and
clamps (3) from frame plate (4).
Discard self-
locking nuts.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
Back to Top
