TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1097 of 1434

TM 9-2320-366-34-2

Change 2

13-437

(5)

Cut two plastic edges (8) to approximately 9 in. (23

cm).

(6)

Apply adhesive to plastic edge (8).

(7)

Install plastic edge (8) on support bracket (9).

(8)

Position support bracket (9) on vehicle with two bolts

(10) and self-locking nuts (11).

(9)

Tighten two self-locking nuts (11) to 120-147 lb-ft

(264-324 N•m).

(10) Perform steps (8) and (9) on remaining support

bracket.

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give

off harmful vapors, and are harmful to

skin and clothing.

Keep away from

open fire and use in a well-ventilated

area.

If adhesive, solvent, or sealing

compound gets on skin or clothing,

wash immediately with soap and water.

Failure to comply may result in injury to

personnel.

NOTE

Both support brackets are installed the same

way.

One support bracket shown.