TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1153 of 1434

TM 9-2320-366-34-2

14-10. STABILIZER MOUNTING BRACKET REPLACEMENT

This task covers:

a. Removal

b. Inspection

c. Installation

d. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Rear stabilizer bar removed (TM 9-2320-366-20-4).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Impact, Electric (Item 88, Appendix B)

Socket Set, Impact (Item 58, Appendix B)

Press, Arbor (Item 48, Appendix B)

Tools and Special Tools (Cont)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix

B)

Wrench Set, Socket (Item 84, Appendix B)

Materials/Parts

Bolt (3) (Item 4, Appendix F)

Nut, Self-Locking (3) (Item 222, Appendix F)

Grease, Automotive and Artillery (GAA) (Item

36, Appendix C)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply will

result in seizing of collar to bolt.

NOTE

Left

and

right

side

stabilizer

mounting

brackets are removed the same way. Right

side shown.

(1) Remove three collars (1), bolts (2), and mounting bracket

(3) from frame (4). Discard collars and bolts.

Change 1

14-49