TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 1240 of 1434

TM 9-2320-366-34-2

D-31. BATTERY 24V CABLE ASSEMBLY 12378576

Make the Battery 24V Cable Assembly from electrical cable, lug terminals, and sleeves according to the following steps.

Refer to the following parts list and

Figure D-55. Battery 24V Cable Assembly

for details. Refer to specification Mil-

B-43436 for requirements.

Item

Part Number

Material Description

Size

Qty

inches

cm

1

12378873-050

Electrical cable 2 AWG

33.5

85.0

1

2

12378873-050

Electrical cable 2 AWG

11.8

30.0

1

3

12414644-001

Positive Terminal

1

4

12414644-003

Positive Terminal

1

5

M20659-120

Terminal, Lug

1

6

M43436/1-3

Band, Marker

1

7

12414663-006

Sleeve, Band Marker

1.0

2.5

2

8

M23053/5-210C

Sleeve, Cable

1.0

2.5

2

9

M23053/4-3050

Sleeving

1.0

2.5

4

10

12414580

Adhesive Thermoplastic

A/R

Figure D-55. Battery 24V Cable Assembly

a. All dimensions are in inches (centimeters).

b. Strip 0.69 inch (1.8 cm) insulation from ends of cables (1 and 2).

c. Install band marker (6) on cable (1) at position shown in

Figure D-55. Battery 24V Cable Assembly

.

d. Mark two marker sleeves (7) in ink with characters 0.13 inch (0.3 cm) high, as follows:

19207-12378575

.

e. Install marker sleeve (7) on cable (1) at position shown in

Figure D-55. Battery 24V Cable Assembly

.

f. Install marker sleeve (7) on cable (2) at position shown in

Figure D-55. Battery 24V Cable Assembly

.

g. Install sleeve (8) on cable (1) over marker sleeve (7).

h. Install sleeve (8) on cable (2) over marker sleeve (7).

D-62

D-62