TM-9-2320-366-34-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-2 - Page 241 of 1434
TM 9-2320-366-34-2
NOTE
If cylinder head is to be replaced proceed to
step (8).
(4) Install injector spring compressor on No. 1 fuel injector
(7).
(5) Tighten bolt to compress injector spring compressor .
(6) Tap injector spring compressor lightly with soft hammer.
(7) Perform steps (4) through (6) on remaining five fuel
injectors (7).
(8) Remove four bolts (8) from fuel control linkage (9).
(9) Disconnect fuel control linkage (9) from each fuel injector
(7).
(10) Remove fuel control linkage (9) from cylinder head (10).
b. Installation.
(1) Position fuel control linkage (1) on cylinder head (2).
(2) Engage all six fuel injectors (3).
CAUTION
Ensure dowel on each mounting bracket is
properly positioned and mounting bracket is
flush against cylinder head.
Failure to
comply may result in damage to equipment.
(3) Position four screws (4) in mounting brackets (5).
4-33
Back to Top
