TM 9-2320-366-34-2
5-3. ENGINE FAN CLUTCH REPAIR (P/N 1090-08000-01) (CONT)
NOTE
Replace fan clutch if any part in steps (3)
through (10) fail inspection.
(3) Inspect clutch housing studs (2) for damage or
looseness.
(4) Sand surface A on shaft mount (3).
(5) Inspect surface A of shaft mount (3) for any signs of
scoring, nicks, cracking, or wear.
(6) Sand surface B of shaft mount (3) to remove any
glazing.
(7) Inspect surface B of shaft mount (3) for any signs of
scoring, burning, or cracking.
(8) Inspect shaft (4) for pitting, corrosion, and signs of
burning.
(9) Inspect piston bearing (5) for free spinning or rough
turning.
(10) Inspect front spring cap (6) for wear which indicates
rubbing.
5-6
Change 1