TM 9-2320-366-34-2
Change 2
7-17
(11) Position shim (3), recessed side down, in torque
converter module (1) with bolt (4).
(12) Tighten bolt (4) to 66-81 lb-ft (89-110 N
•
m).
(13) Install retainer packing (5) on converter end plug
(6).
(14) Install converter end plug (6), flat side up, in torque
converter module (1) with retaining ring (7).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and
can act as projectiles when released.
Failure to comply may result in injury to
personnel.
NOTE
Perform steps (13) and (14) on transmissions
prior to S/N 6510165560.