TM 9-2320-366-34-2
NOTE
• Perform step (87) on vehicles equipped with
hydraulic rotary pump.
• Step (87) requires the aid of an assistant.
(87) Remove two screws (116), washers (117), and
hydraulic rotary pump (118) from PTO (119).
NOTE
Perform steps (88) through (92) on M1089.
(88) Remove three bolts (120) from support bracket (121).
(89) Remove two nuts (122), washers (123) and support
bracket (121) from three stage hydraulic pump (124).
(90) Install two washers (123) and nuts (122) on three
stage hydraulic pump (124).
WARNING
WARNING
Three stage hydraulic pump weighs
approximately 70 lbs (32 Kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (91) requires the aid of an assistant.
(91) Remove four nuts (125), washers (126), and three
stage hydraulic pump (124) from Power Take-Off
(PTO) (119).
(92) Remove three hoses (127) from three stage hydraulic pump (124).
Change 1
7-26.15