TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005
CHANGE 2

  TM-9-2320-366-34-2 - Page 37 of 1434

TM 9-2320-366-34-2
WARNING
High pressure steam can blow particles or chemicals into eyes, can cause severe
burns, and creates hazardous noise levels. Wear appropriate eye, skin, and hearing
protection when using high pressure steam. Failure to comply may result in serious
injury to personnel.
WARNING
Some chemical agents (detergents, solvents, alkalis, etc.) may irritate skin or be
harmful to the eyes, nose, and throat.
Some must be used only with adequate
ventilation. When working with potentially harmful chemical substances, read and
heed all warnings on the product labels and follow prescribed safety precautions.
When working with any potentially harmful substance; including live steam, hot water,
and compressed air; wear appropriate safety equipment and use extreme care. Failure
to comply may result in injury to personnel.
WARNING
Follow these general precautions whenever using these methods of crack detection
to prevent personnel injury. Never shine the black light directly into the eyes. Do not
smoke or eat while using inspection chemicals. Avoid getting chemicals on clothing.
Avoid inhaling spray mist, airborne powder dust and solvent vapors.
Provide
adequate ventilation. Store chemicals away from open flames and sources of heat.
Failure to comply may result in injury to personnel.
WARNING
Crankshaft weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device
prior to removal. Failure to comply may result in injury to personnel or damage to
equipment.
WARNING
Crankshaft weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device
prior to installation. Failure to comply may result in injury to personnel or damage to
equipment.
WARNING
Use extreme care when handling heated gear. Failure to comply may result in injury
to personnel.
WARNING
Use extreme care when handling heated camshaft gear. Failure to comply may result
in injury to personnel.
Change 1
ai


Back to Top