TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 518 of 1434

TM 9-2320-366-34-2

9-8.2

Change 2

9-2.

FRONT AXLE ASSEMBLY REPLACEMENT (CONT)

(14) Tighten four screws (18).

(14.1)Tighten four screws (18) to 26-35 lb-ft (35-47 N•m)

(14.2)Fold tabs on four screws (18).

(15) Connect drag link end (19) to pivoting arm (20).

(16) Position nut (21) on drag link end (19).

(17) Tighten nut (21) to 140-170 lb-ft (190-230 N•m).

(18) Install cotter pin (22) in nut (21).

(19) Install clamp (23) on bracket (4) with screw (24)

and self-locking nut (25).

NOTE

Left and right sides of front axle assembly is

installed the same way.

Right side shown.

NOTE

Perform the following two steps on bearing

cups equipped with tabs.

NOTE

•

Perform the following step on kits

equipped with shearhead screws.

•

Alternately tighten screws.

•

When correct torque is reached, bearing

cap small screw hexhead will break off.