TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 1005 of 1178

TM 9-2320-366-34-3

D-55. DIMMER SWITCH TEST WIRE

Fabricate the dimmer switch test wire according to the following steps. Refer to the following parts list for materials.

Material Description

National Stock Number

Quantity

Cut Length

Wire, Electrical

(M168678/14BKE9)

6145-01-229-4134

1

12 in (305 mm)

Pin, Grooved, Headless

(12258939-1)

5315-01-156-6314

1

Contact, Electrical

(12258939-2)

5999-01-150-8808

1

a. Dimensions are in inches (millimeters).

b. Cut a length of electrical wire approximately 12 in. (305 mm) long.

c. Remove approximately 1/4 in. (6 mm) of insulation from each end of electrical wire.

d. Crimp headless grooved pin on one end of electrical wire.

e. Crimp electrical contact on opposite end of electrical wire.

Change 1

D-81