TM-9-2320-366-34-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-3 - Page 326 of 1178
TM 9-2320-366-34-3
16-18. M1084/M1086 HOLDING VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Materials/Parts
Kit, Seal (Item 107, Appendix F)
a. Removal.
(1) Remove holding valve (1) from motor control valve (2).
(2) Remove three preformed packings (3) from holding valve
(1). Discard preformed packings.
(3) Remove two preformed packings (4) from holding valve
(1). Discard preformed packings.
(4) Remove preformed packing (5) from holding valve (1).
Discard preformed packing.
16-90
Back to Top
