TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 354 of 1178

TM 9-2320-366-34-3

16-23. M1084/M1086 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT)

(5) Install spacer (6) on shaft (4).

(6) Install gear (7) on shaft (4).

(7) Install plate (8) on shaft (4) with two screws (9).

(8) Install bearing (10) and lockwasher (11) on shaft (4).

(9) Position nut (12) on shaft (4).

NOTE

Rotate shaft when tightening nut.

(10) Tighten nut (12) to 30-100 lb-ft (41-136 N·m).

NOTE

All three gears are installed the same way.

One gear shown.

(11) Install center spacer (13) in carrier (14).

(12) Install bearing (15) in gear (16).

(13) Install gear (16), two spacers (17), and pin (18) in carrier

(14).

(14) Install roll pin (19) in pin (18).

(15) Perform steps (11) through (14) on two remaining gears.

16-118