TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 459 of 1178

TM 9-2320-366-34-3

(7) Position tension link cylinder (2) in boom assembly (7)

with pivot shaft (8).

(8) Install two rivet eyebolts (9) in pivot shaft (8).

WARNING

Adhesive Sealant MIL-S-46163 can damage

your eyes. Wear safety goggles when using;

avoid contact with eyes. If sealant contacts

eyes,

flush

eyes

with

water

and

get

immediate medical attention.

Failure to

comply may result in injury to personnel.

(9) Apply sealing compound to threads of two screws (10).

(10) Position two bushings (11) and washers (12) in rivet

eyebolts (9) with screws (10).

(11) Tighten screws (10) to 240-260 lb-ft (325-352 N·m).

(12) Perform Steps (1) through (11) on left side tension link

cylinder.

c. Follow-On Maintenance.

Perform crane load test (para 16-62).

End of Task.

16-223