TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 769 of 1178

TM 9-2320-366-34-3

(27) Install preformed packing (33) on plug (34).

(28) Install pressure valve (35), spring (36), and plug (34)

in valve (37).

(29) Install gasket (38) in valve (23).

(30) Install three gaskets (39) in valve (23).

(31) Position valve (37) with valve (23).

(32) Install gasket (40) in valve (37).

(33) Install three gaskets (41) in valve (37).

(34) Position valve (42) with valve (37).

CAUTION

Verify that valves are returned to their original

configuration. Failure to comply may result in

damage to equipment.

NOTE

• Apply lubricating oil to all studs prior to

installation.

• When positioning studs, washers and nuts, an

even amount of threads must show on either side

of stud after applying torque.

(35) Position four studs (43), eight washers (44), and nuts

(45) in lower control valve assembly (46).

(36) Tighten eight nuts (45) to 29 lb-ft (39 N·m).

(37) Re-tighten eight nuts (45) to 42 lb-ft (57 N·m).

Change 1

16-516.9