TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 945 of 1178

TM 9-2320-366-34-3

D-7. DUMP BODY CAB PROTECTOR PIVOT PIN REMOVAL TOOL

Make the dump body cab protector pivot pin removal tool from 0.50 inch (1.3 cm) round steel stock according to the

following figures. Refer to the parts list and figure for details.

Item

Part Number

Material Description

Size

Qty

1

N/A

Steel, Round Bar

108.0 in. (274.3 cm) x 0.50 in. (1.3 cm) OD

1

2

N/A

Steel, Round Bar

5.00 in. (13 cm) x 0.50 in. (1.3 cm) OD

1

Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly

a. All dimensions are in inches (centimeters).

b. Position and clamp (1) and (2) pieces together as shown by dimensions in

Figure D-15. Dump Body Cab

Protector Pivot Pin Removal Tool Assembly

.

c. Weld (1) to (2) as identified on assembly table and shown in

Figure D-15. Dump Body Cab Protector Pivot Pin

Removal Tool Assembly

.

d. Weld both sides indicated in

Figure D-15. Dump Body Cab Protector Pivot Pin Removal Tool Assembly

.

e. De-burr and remove sharp edges.

D-21

D-21