TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 200 of 796

TM 9-2320-366-34-4

20-3. CYLINDER HEAD REPAIR (CONT)

e. Assembly.

NOTE

Remove all cutting chips and debris from

cylinder head fuel galley. Use a cotton swab,

lightly coated with grease, to aid in removal

of any particles.

(1) Clean injector sleeve bores (1) in cylinder head (2).

(2) Clean injector sleeves (3).

WARNING

Adhesives, solvents, and sealing compounds

can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep

away from open fire and use in a well

ventilated area.

If adhesive, solvent, or

sealing compound gets on skin or clothing,

wash immediately with soap and water.

Failure to comply may result in injury to

personnel.

(3) Spray dry cleaning solvent inside of each injector sleeve

bore (1) in cylinder head (2) and outside of each injector

sleeve (3).

(4) Spray primer inside of each injector sleeve bore (1) in

cylinder head (2) and outside of each injector sleeve (3).

20-18