TM 9-2320-366-34-4
26-10. M1084/M1086 BOOM TELESCOPIC CYLINDER REPAIR (CONT)
(1) Clean all parts with dry cleaning solvent.
NOTE
If cylinder barrel fails inspection in Step (2) stop
inspection
procedure
and
replace
cylinder
assembly.
(2) Inspect inner walls of telescopic cylinder (1) for pitting,
corrosion, or evidence of binding.
NOTE
Replace any part that fails visual inspection.
(3) Inspect two rods (2) for pitting, corrosion, or evidence of
binding.
(4) Inspect two pistons (3) for pitting, corrosion, or evidence
of binding.
(5) Inspect two cylinder heads (4) for pitting and corrosion.
c. Assembly.
NOTE
Apply lubricating oil to all parts during
assembly.
Assemble upper cylinder first.
(1) Install retaining plate (1) on rod (2).
(2) Install wiper ring (3) on rod (2).
26-64