TM
TM 9-2320-366-34-4
9-2320-366-34-4
LIST OF TABLES (CONT)
Number
Title
Page
23-1
Pinion Bearing Preload Chart.
...................................................
23-12
23-2
Pinion Cone Variation Chart.
....................................................
23-15
24-1
Pinion Cone Variation Chart.
....................................................
24-11
24-2
Pinion Bearing Preload Chart.
...................................................
24-34
24-3
Pinion Cone Variation Chart.
....................................................
24-37
D-1
Pneumatic Tube Lengths .
.......................................................
D-64
D-2
Non-Metallic Electrical Cable Conduit Lengths.
........................................
D-68
D-3
M1089 30K Air Hose Lengths and Fittings .
..........................................
D-83
E-1
Dry Torque Limits for SAE and ANSI Screws and Free Spinning Nuts .
.......................
E
-2
E-2
Dry Torque Limits for SAE and ANSI Prevailing Torque Nuts .
..............................
E
-4
E-3
Dry Torque Limits for Metric Screws and Free Spinning Nuts .
..............................
E
-5
E-4
Dry Torque Limits for Metric Prevailing Torque Nuts .
....................................
E
-6
E-5
Wet Torque Limits for SAE and ANSI Screws and Free Spinning Nuts .
.......................
E
-7
HOW TO USE THIS MANUAL
OVERVIEW
This Technical Manual (TM) is provided to help you maintain the MTV at the Direct Support (DS) and General Support
(GS) Maintenance levels. This volume, Volume 4, contains information which will assist you in the performance of DS
and GS Maintenance on the MTV. Volume 4 contains the following major sections in order of appearance:
•
WARNING SUMMARY.
Provides a summary of the most important warnings that apply throughout
the manual. Read all
WARNINGS
and
CAUTIONS
before performing any maintenance procedure.
•
TABLE OF CONTENTS.
Lists the chapters, sections, appendixes, and indexes with page numbers
in order of appearance.
•
MAINTENANCE PROCEDURES.
DS and GS Maintenance procedures to assist you in supporting the
MTV. Chapters 18 and 19 are Direct Support Maintenance procedures. General Support Maintenance
procedures are contained in chapters 20 through 27. Become familiar with the entire maintenance
procedure before beginning any maintenance task.
DIRECT SUPPORT MAINTENANCE
•
CHAPTER 18, SPECIAL PURPOSE KIT MAINTENANCE
•
CHAPTER 19, ARMAMENT/SIGHTING AND FIRE CONTROL MATERIEL MAINTENANCE
GENERAL SUPPORT MAINTENANCE
•
CHAPTER 20, ENGINE MAINTENANCE
•
CHAPTER 21, TRANSMISSION MAINTENANCE
•
CHAPTER 22, POWER TRANSFER AND FINAL DRIVE ASSEMBLY MAINTENANCE
•
CHAPTER 23, FRONT AXLE MAINTENANCE
Change 1
v