TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 524 of 796

TM 9-2320-366-34-4

27-2. M1090/M1094 DUMP BODY LIFT CYLINDER REPAIR (CONT)

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(9) Apply adhesive-sealant to threads of nut (17).

(10) Position nut (17) on cylinder rod (13).

(11) Tighten nut (17) to 1563-1719 lb-ft (2119-2331 N·m).

(12) Install preformed packing (18) on bypass housing (19).

(13) Install pin (20), ball (21), pin (22), and bypass housing

(19) in bypass valve (23).

(14) Install preformed packing (24) on bypass valve (23).

(15) Install bypass valve (23) on piston (11).

27-8