TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 231 of 1078

REMOVAL

CAUTION

Cap or plug all openings to prevent contaminants from entering

engine or turbocharger. Failure to do so may result in

turbocharger and/or engine damage.

1.

Disconnect oil inlet tube (2) from elbow (4).

2.

Remove two screws (1), washers (9), oil inlet tube (2), gasket (8), and O-ring (3) from turbocharger (7)

and elbow (4). Discard gasket (8) and O-ring (3).

3.

Remove elbow (4) and O-ring (5) from engine (6). Discard O-ring (5).

INSTALLATION

1.

Install new O-ring (5) and elbow (4) on engine (6).

2.

Position new O-ring (3) on oil inlet tube (2).

3.

Install new gasket (8) and oil inlet tube (2) on turbocharger (7) with two washers (9) and screws (1).

4.

Connect oil inlet tube (2) to elbow (4).

5.

Install air cleaner hoses (WP 0038 00).

6.

Start engine (TM 9-2320-386-10) and check for leaks.

TM 9-2320-386-24-1-1

0043 00

TURBOCHARGER OIL INLET TUBE REPLACEMENT (Contd)

0043 00-2