TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 273 of 1078

0058 00-2

TM 9-2320-386-24-1-1

0058 00

QUICK-START MOUNTING BRACKET REPLACEMENT (BUILT BEFORE SERIAL NO. 504924) (Contd)

REMOVAL

1.

Remove locknut (20), screw (15), clamp (16), atomizer tee (17), and tube (18) from mounting

bracket (19). Discard locknut (20).

2.

Remove four screws (10), lockwashers (11), ground strap (5), lockwasher (4), and mounting

bracket (6) from engine (1). Discard lockwashers (11) and (4).

3.

Remove two locknuts (2), screws (12), washers (13), and clamp (14) from mounting bracket (6).

Discard locknuts (2).

4.

Remove two locknuts (3), screws (8), washers (7), and bracket (9) from mounting bracket (6).

Discard locknuts (3).

INSTALLATION

1.

Install bracket (9) on mounting bracket (6) with two washers (7), screws (8), and new locknuts (3).

2.

Install clamp (14) on mounting bracket (6) with two washers (13), screws (12), and new locknuts (2).

3.

Install mounting bracket (6), new lockwasher (4), and ground strap (5) on engine (1) with four new

lockwashers (11) and screws (10).

4.

Install tube (18) and atomizer tee (17) on mounting bracket (19) with clamp (16), screw (15), and

new locknut (20).

5.

Install quick-start cylinder and valve (WP 0055 00).