TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 290 of 1078

0064 00-2

TM 9-2320-386-24-1-1

0064 00

ACCELERATOR CABLE MAINTENANCE (Contd)

REMOVAL

1.

Remove spring (1) from throttle bracket (17) and anchor (18).

2.

Remove screw (3) and stop collar (2) from throttle cable (5).

3.

Remove cotter pin (19) from pivot (4) and pivot (4) from throttle bracket (17) and throttle cable (5).

Discard cotter pin (19).

4.

Pull sleeve (15) back on accelerator cable (10) and remove accelerator cable (10) from ball joint (16).

5.

Remove nut (12), lockwasher (13), ball joint (16), and throttle bracket (17) from throttle lever (14).

Discard lockwasher (13).

6.

Remove two locknuts (8), screws (6), and lock support (7) from cable support (9). Discard

locknuts (8).

7.

Remove throttle cable (5) and accelerator cable (10) from cable support (9).

8.

Loosen jamnut (11) and remove sleeve (15) from accelerator cable (10).

9.

Remove cotter pin (28), pin (26), and accelerator cable clevis (27) from bellcrank (25). Discard cotter

pin (28).

10.

Loosen jamnut (29) and remove accelerator cable clevis (27) from accelerator cable (10).

11.

Remove locknut (30), accelerator cable (10), and screw (20) from accelerator support bracket (21).

Discard locknut (30).

12.

Remove locknut (24), accelerator support bracket (21), and screw (22) from firewall (23). Discard

locknut (24).

13.

Remove accelerator cable (10) from vehicle.