TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 441 of 1078
0110 00-2
TM 9-2320-386-24-1-1
0110 00
BACKUP LIGHTS AND LAMPS REPLACEMENT (Contd)
LAMP REMOVAL
1.
Remove two screws (5), bezel (4), lens cover (3), and gasket (2), from backup light (1). Discard
gasket (2).
2.
Remove lamp (6) from backup light (1).
BACKUP LIGHT REMOVAL
1.
Disconnect backup light lead 467 (7) from wiring harness lead 380A (9).
2.
Remove nut (12) and clamp (11) from bracket (13) and backup light lead (7).
3.
Remove two nuts (10), lockwashers (8), and backup light (1) from bracket (13). Discard lock-
washers (8).
BACKUP LIGHT INSTALLATION
1.
Install backup light (1) on bracket (13) with two new lockwashers (8) and nuts (10).
2.
Install clamp (11) and backup light lead 467 (7) on bracket (13) with nut (12).
3.
Connect backup light lead 467 (7) to wiring harness lead 380A (9).
LAMP INSTALLATION
1.
Install lamp (6) on backup light (1).
2.
Install new gasket (2), lens cover (3), and bezel (4) on backup light (1) with two screws (5).
3.
Connect battery ground cable (WP 0121 00).
Back to Top
