TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 485 of 1078

TM 9-2320-386-24-1-1

0125 00

ELECTRICAL WIRING HARNESS REPAIR (Contd)

CONNECTOR CABLE REPAIR

1. Strip cable insulation (12) to depth of solder wells (4) on inserts (15).

2. Slide cable ends (18) through retaining nut (13) and grommet (14).

NOTE

Refer to TM 9-237 for soldering instructions.

3. Position cable ends (18) into solder wells (4) and solder.

NOTE

Inserts may be either male or female. Coupling nuts will have a

matching configuration.

4. Slide grommet (14) over inserts (15) and press grommet (14) into coupling nut (17) until seated.

5. Install grommet retaining nut (13) on threads (16) of coupling nut (17) and tighten until seated.

6. Connect battery ground cable (WP 0121 00).

0125 00-3/4 blank

END OF WORK PACKAGE

12

13

14

4

15

16

18

4

15

17