TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 572 of 1078

TM 9-2320-386-24-1-1

0154 00

SERVICE BRAKE SYSTEM BLEEDING (Contd)

0154 00-2

FILLING MASTER CYLINDER

WARNING

Accidental or intentional introduction of liquid contaminants into

the environment is in violation of state, federal, and military

regulations. Refer to Army POL (WP 0001 00) for information

concerning storage, use and disposal of these liquids. Failure to do

so may result in injury or death.

Clean master cylinder reservoir filler cap and surrounding area

before removing cap. System contamination can result in injury to

personnel or equipment damage.

1.

Remove two master cylinder reservoir filler caps (1) from master cylinder reservoir (2).

NOTE

Fluid added to master cylinder reservoir will also fill master

cylinder.

2.

Using a clean flexible neck oil filler can, fill master cylinder reservoir (2) with silicone brake fluid

from a sealed container labeled MIL-B-46176.

3.

Install two master cylinder reservoir caps (1) on master cylinder reservoir (2).

2

1