TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 822 of 1078

0219 00-2

TM 9-2320-386-24-1-1

0219 00

FRONT WINCH HYDRAULIC OIL RESERVOIR MAINTENANCE (Contd)

REMOVAL

1.

Remove hose (2), elbow (3), and O-ring (4) from reservoir (5). Discard O-ring (4).

2.

Remove tube (6), elbow (7), and O-ring (1) from reservoir (5). Discard O-ring (1).

3.

Remove two locknuts (9) and screws (8) from retaining straps (32) and (11). Discard locknuts (9).

4.

Move two retaining straps (32) and (11) away from reservoir (5) and remove reservoir (5) from

support bracket (27).

5.

Remove two locknuts (29), screws (28), and retaining straps (32) from support bracket (27). Discard

locknuts (29).

6.

Remove two locknuts (10), screws (12), and retaining straps (11) from support bracket (27). Discard

locknuts (10).

7.

Remove locknut (18), screw (30), and clamp (17) from rail (19) and wiring harness (16). Discard

locknut (18).

8.

Remove three locknuts (14), screws (31), and support bracket (27) from rail (19) and rail

extension (13). Discard locknuts (14).

9.

Remove sight glass (26) from reservoir (5).

10.

Remove drainplug (24) and gasket (25) from reservoir (5). Discard gasket (25).

11.

Remove filter (23) from reservoir (5).

NOTE

It is not necessary to disconnect cap from chain or chain from

lockplate.

12.

Remove cap (15) from lockplate (21).

13.

Remove six screws (20), lockplate (21), and screen (22) from reservoir (5).