TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 840 of 1078
TM 9-2320-386-24-1-1
0224 00
UNIT MAINTENANCE INSTRUCTIONS
EXTENDED SERVICE PROGRAM (ESP)
TRUCK, CARGO, 2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
M35A3, W/WINCH (NSN 2320-01-383-3850);
M35A3C, W/WINCH (NSN 2320-01-383-2049);
M36A3, W/WINCH (NSN 2320-01-383-2046).
FRONT WINCH CABLE MAINTENANCE
REMOVAL, CLEANING AND INSPECTION, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit
(item 30, WP 0394 00)
Materials/Parts
Lubricating oil (item 32, WP 0393 00)
Wiping rags (item 35, WP 0393 00)
0224 00-1
Personnel Required
Assistant (1)
References
TM 9-2320-386-24P
Equipment Condition
Parking brake set (TM 9-2320-386-10).
WARNING
Wear leather gloves when handling cable. Do not let cable run
through hands. Broken or rusty wires may cause injury to
personnel.
Direct all personnel to stand clear of winch cable during winch
operation. A snapped winch cable may result in injury to
personnel.
Do not exceed 1500 rpm engine speed during winch operation.
Use hand throttle to avoid erratic engine speed that could cause
injury to personnel.
CAUTION
Do not proceed with front winch operation if oil level is low.
Damage to internal components may result.
Back to Top
