TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 877 of 1078

NOTE

Left and right windshield wiper blades and arms are replaced the

same. This procedure covers left windshield wiper blade and arm.

REMOVAL

1.

Remove locknut (5), screw (6), and wiper blade (7) from wiper arm (4). Discard locknut (5).

2.

Remove locknut (3), wiper arm (4), and arm driver (2) from idler shaft (1). Discard locknut (3).

INSTALLATION

NOTE

Install wiper arm in line with idler shaft link.

1.

Install arm driver (2) and wiper arm (4) on idler shaft (1) with new locknut (3). Tighten locknut (3)

90-110 lb-in. (10-12 N

•

m).

2.

Install wiper blade (7) on wiper arm (4) with screw (6) and new locknut (5). Tighten locknut (5)

15-20 lb-in. (1.7-2.3 N

•

m).

0235 00-2

TM 9-2320-386-24-1-1

0235 00

WINDSHIELD WIPER BLADE AND ARM REPLACEMENT (Contd)