TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 940 of 1078

TM 9-2320-386-24-1-1

0259 00

SWINGFIRE HEATER BATTERY BOX HEATER TUBE REPLACEMENT (Contd)

0259 00-2

REMOVAL

1.

Remove two nuts (11), lockwashers (10), screws (7), clamp (9), and exhaust tube (8) from exhaust

elbow (16). Discard lockwashers (10).

2.

Remove four locknuts (13) and screws (15) from battery support plate (2) and running board

supports (6) and (14). Discard locknuts (13).

3.

Remove pan assembly (1), with insulation (3), and battery support plate (2) from baffle plate (5).

4.

Remove six locknuts (12), screws (4), and baffle plate (5) from running board supports (6) and (14).

Discard locknuts (12).

INSTALLATION

1.

Install baffle plate (5) on running board supports (6) and (14) with six screws (4) and new

locknuts (12).

2.

Install pan assembly (1), with insulation (3), and battery support plate (2) on baffle plate (5).

3.

Install battery support plate (2) on running board supports (6) and (14) with four screws (15) and

new locknuts (13).

4.

Install exhaust tube (8) and clamp (9) on exhaust elbow (16) with two screws (7), new lock-

washers (10), and nuts (11).

5.

Install STE/ICE-R shunt (WP 0124 00).

6.

Install battery box (WP 0123 00).