TM-9-2320-386-24-1-2

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2

MAY 2001

TM-9-2320-386-24-1-2 - Page 440 of 636

NOTES

There is one piston cooling tube for each piston. Position each

piston cooling tube to spray the piston.

Rotate crankshaft as necessary to gain access to piston cooling

tubes.

REMOVAL

Remove six screws (2) and piston cooling tubes (1) from cylinder block (3).

INSTALLATION

1.

Install six piston cooling tubes (1) on cylinder block (3) with six screws (2).

2.

Install oil pump (WP 0313 00).

3.

Install engine oil pan (WP 0312 00).

0362 00-2

TM 9-2320-386-24-1-2

0362 00

PISTON COOLING TUBES REPLACEMENT (Contd)