TM-9-2320-387-10
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
OPERATOR’S MANUAL
OCTOBER 2001
CHANGE 1
TM-9-2320-387-10 - Page 118 of 277
TM
9-2320-387-l 0
2-15. OPERATION OF VEHICLE LIGHT SWITCH
a. Tt,
illuminate instrument panel:
(1)
Lift unlock lever (2) to UNLOCK and hold in position.
(2) Turn selector switch lever (1) to any ON position except B.O. MARKER.
(3) Turn auxiliary lever (3) to DIM or PANEL BRT (bright).
b.
For normal daylight driving, turn selector lever (1) to STOPLIGHT.
c. For night driving, turn selector lever (1) to SERVICE DRIVE. The headlight
dimmer foot switch is depressed to provide high beam service light operation. The
indicator light (4) on the instrument panel should illuminate when high beams are
operating.
d.
In blackout operations:
(1)
When driving vehicle, turn selector lever (1) to B.O. DRIVE.
(2) When vehicle is parked, turn selector lever (1) to B.O. MARKER.
e. To illuminate parked vehicle at night (if tactical situation permits):
(1)
Keep selector lever (1) in SERVICE DRIVE.
(21 Turn auxiliary lever (31 to PARK_
f.
Move turn signal lever up for right turns, and down for left turns.
NOTE
l
When
activated, the warning flashers override operation of the
brake lights.
l
The headlights cannot be turned on when auxiliary lever (3) is in
the PARK position.
g. For hazard warning lights (blinking lights):
(1) Turn selector lever (1) to SERVICE DRIVE or STOPLIGHT.
(2)
Pull warning hazard tab out and move turn signal lever up to lock lever in
place.
(3) ‘Ib deactivate, move turn signal lever back to NEUTRAL.
h.
For horn oneration. turn selector lever (1) to either STOPLIGHT or SERVICE
DRIVE.
*
’
2-70
FRONT
Back to Top
