6.1
Before
Power
Steering
Reservoir
(Cont’d)
Check fluid in power steering
reservoir. Fluid should be be-
tween HOT and COLD
marks. Add fluid if level is
below COLD mark.
DRIVER
7
Before
Serpentine
a.
Visually check drive and
a.
Pulleys worn,
Drivebelt
idler pulleys for evidence of
broken,or misaligned.
and Pulleys excessive wear or misalignment.
b.
Check if serpentine
b.
Serpentine
drivebelt is missing, broken,
drivebelt is missing
cracked, frayed, loose,
or broken. Drivebelt
misaligned, or split.
fiber has more than one
crack 1/8 in. (3.2 mm)
in depth or 50%, or
frays more than 2-in.
(5.1-cm) long. Drivebelt
is loose or misaligned
(off one or more grooves
on any pulley).
DRIVER
8
Before
Cooling
WARNING
System
If engine has been recently
operated, do not remove
radiator cap to check
coolant level. Cooling
system is under pressure,
and escaping steam or
coolant can cause burns.
Table 2-2. Preventive Maintenance Checks and Services (Cont’d).
Item
No.
Interval
Not Fully Mission
Capable If:
Location
Item to
Check/
Service
Crewmember
Procedure
TM 9-2320-387-10
Change 1
2-33
HOT
ADD
COLD