TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1075 of 1205

TM 9-2320-387-24-l

8-13. TIE ROD MAINTENANCE

This task covers:

a. Removal

b. Disassembly

c. Assembly

d. Installation

INITIAL SETUP:

Tools

General

mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Puller kit (Appendix B, Item 157)

Materials/Parts

~JVO

cotter pins (Appendix G, Item 35)

Two locknuts (Appendix G, Item 120)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Front of vehicle raised and supported (para. 8-2).

Maintenance Level

Unit

Using a pickle fork instead of puller kit may damage serviceable

components (boots).

II

1.

Remove cotter pin (81 and slotted nut (71 from tie rod (2) and center link (1). Discard cotter pin (8).

2.

Remove cotter pin (61, slotted nut (51, washer

(41,

and tie rod (2) from geared hub (3). Discard cotter

pin (6).

--

8-37