TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 202 of 1205

TM 9-2320-387-24-l

REFERENCE INFORMATION

--

-I

First, check the air fitter restriction gauge on

the dashboard, just to the left of the steerlng

wheel. and make a note of its reading.

Open the air cleaner cannister, remove the

air cleaner element and inspect it for dirt and

other contaminants. Replace air filter

(para. 3-13). A clean air filter is whlte. If

me condition of me filter does not agree wtth

the gauge on me dashboard, make a note to

check me gauge. See Instruments tests.

page 2-305.

Make sure that all mounting bolts are in

place and tight. Look for obvious things like

a crushed or cracked air filter or air induction

tube and check gaskets where possible.

Replace induction system components

(para. 3-12).

i

Look for damage caused by rocks such

as bent pipes or holes and loose or

broken clamps.

Small dents (depth less than l/4 the

diameter of the exhaust pipes) should

not cause the pipes to be replaced as

long as me pipes are intact

Replace induction system components

(para. 3-12).

INTAKE AIR/ EXHAUST

2-143