TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997
CHANGE 1

  TM-9-2320-387-24-1 - Page 337 of 1205

TM 9-2320-387-24-l
REFERENCE INFORMATION
0
II
. .
WARNING
-i
Disconnect
negative battery
cable before disconnecting
and
reconnecting
PCB harness.
.
I
WARNING
I
There is battery voltage at the
PCB at all times.
failure
to
disconnect
battery cable will
result in damage to equipment
or injury to personnel.
Replace harness or PCB (para. 4-4).
STARTER CIRCUIT
RESISTANCE
AND CONTINUITY
04,500
OHMS
STEIICE-R TEST 91
1. Connect RED clip and
BLACK
clip to the
terminals indicated in the question.
2. Start
Test 91, o-4500
Ohms.
3. Displayed reading is in ohms. Less than 5
ohms is continuity.
If the resistance is over
4,500 ohms, STUICE-R
displays .9.9.9.9.
CONTINUITY
(RESISTANCE)
MULTIMETER
I
1. Set the voltmeter to an ohms scale of about
1,000 ohms.
2. Connect the RED and BACK
leads to the
connections
stated in the question.
3. Be
sure to read the correct scale.
Less
than
5 ohms indicates continuity.
For an open
circuit, the meter should peg full scale (needle
all the way to the left).
2-281


Back to Top