REFERENCE INFORMATION
1
WARNING
Make sure
the area is clear of
personnel
and obstacles
prior to
performing
this test. Failure to do so
may result in serious injury.
PARKING
BRAKF TEST PROCFDURE:
1. Depress service brake pedal and start engine.
2. Place transmission
shift lever in D (drive) and transfer
case shift lever in H (high).
3. Apply parking brake. Slowly let up on service brake
pedal. Vehicle should remain stationary.
SFRVICF
BRAKF ROAD TEST PROCFDURF-
1. On an open, smooth, flat surface, accelerate
to a
steady, reasonable,
safe speed (below posted limits).
2. Apply pressure on the brake pedal and bring the
vehicle to a stop.
3. Repeat this procedure
several times, applying a
different brake pedal pressure each time.
Look for
the following symptoms,
which may indicate a
problem with the service brakes:
1) Spongy or pulsating brake pedal.
2) Incomplete
brake pedal return.
3) Excessive
pull to one side.
4) Unusually long braking distance.
5) Front wheels lock up before rear wheels.
6) Brake warning light comes on while braking.
7) A squealing,
grinding, or chattering
noise while
braking.
TM 9-2320-387-24-l
BRAKE SYSTEM
2-421