TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 620 of 1205

TM 9-2320-387-24-l

3-26. FUEL TANK SUPPLY AND RETURN LINES REPLACEMENT

This task covers:

a.

Removal

b.

Installation

I

--

INITIAL

SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

‘ItKo locknuts (Appendix G, Item 109)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment

Condition

Engine

right splash shield removed (para. 10-24).

General Safety Instructions

Do not perform this procedure near fire, flames, or

sparks.

Maintenance

Level

unit

WARNING

Diesel fuel is highly flammable. Do not perform this procedure

near fire, flames, or sparks. Severe injury or death may result.

[I

CAUTION

*

Cover or plug all open hoses and connections immediately after

disconnection to prevent contamination. Remove all plugs prior to

connection.

NOTE

Have drainage container ready to catch fuel.

1.

Loosen four clamps (71 and disconnect hoses (61 from fuel tank return and supply lines (8).

2.

Remove two locknuts (11, capscrews (51, washers (41, clamps (31, and return and supply lines (8) from

front body bracket (2) and rear body bracket (101. Discard locknuts (1).

3.

Remove three clips (9) from fuel supply and return lines (81.

)I

1.

Install return and supply lines (8) on front body bracket (2) and rear body bracket (10) with two

clamps (3), washers (41, capscrews (51, and locknuts (11.

2.

Connect supply and return lines (8) to four hoses (6) and tighten clamps (7).

3.

Secure fuel supply and return lines (8) together with three clips (91.

3-52