TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 719 of 1205

4-3. ALTERNATOR/POWER STEERING MOUNTING BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

b. Installation

Remove two flanged-head capscrews (3), long flanged-head capscrew (2), and mounting bracket (1)

from engine (4).

Apply sealing compund to capscrews (2) and (3), and install mounting bracket (1) on engine (4) with

two flanged-head capscrews (3) and long flanged-head capscrew (2). Tighten capscrews (3) and (2) to

48 lb-ft (65 N

•

m).

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Materials/Parts

Sealing compound (Appendix C, Item 60)

Manual References

TM 9-2320-387-24P

Equipment Condition

• Alternator removed (para. 4-5).

• Tensioner, idler pulleys, and mounting

hardware removed (para. 3-82).

• Power steering pump removed (para. 8-23).

Maintenance Level

Unit

TM 9-2320-387-24-1

4-4

Change 1