TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 898 of 1205

TM 9-2320-387-24-1

5-24

Change 1

5-10. TRANSMISSION VENT LINE REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

b. Installation

1.

Remove vent line (2) from transmission (3) and tee fitting (1).

2.

Remove vent line (12) from tee fittings (1) and (11).

3.

Remove capscrew (5), clamp (7), and vent line (10) from engine mount bracket (6).

4.

Remove capscrew (4), clamp (8), and vent line (10) from bracket (9).

5.

Remove vent line (10) from tee fittings (11) and (13).

6.

Remove clamps (7) and (8) from vent line (10).

1.

Install clamps (7) and (8) on vent line (10).

2.

Install vent line (10) on tee fittings (11) and (13).

3.

Install vent line (10) and clamp (7) on engine mount bracket (6) with capscrew (5).

4.

Install vent line (10) and clamp (8) on bracket (9) with capscrew (4).

5.

Install vent line (12) on tee fittings (11) and (1).

6.

Install vent line (2) on tee fitting (1) and transmission (3).

7.

Install insulation if removed.

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

Maintenance Level

Unit

NOTE

Insulation may need to be removed to access vent lines.