TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 981 of 1205

TM?-2320-387-24-1

6-28. SHOCK ABSORBER REPLACEMENT (Cont’d)

NOTE

Perform steps 5

through 8 if necessary to reassemble body mount

bracket to frame and rear bumper.

5.

Install shackle (4) and body mount bracket (3) on rear bumper (6) with washer (7) and slotted nut (8).

6.

Tighten slotted nut (8) and install cotter pin (9).

7.

Secure body mount bracket (3) to rear bumper (6) with two washers (Z), capscrews (5), washers (2),

and locknuts (1).

8.

Tighten locknuts (1) to 90 lb-ft (122 N-m).

FOLLOW-ON TASKS:

l

Lower and secure hood (front shock absorbers only) (TM 9-2320-387-10).

l

Install shelter (Ml113 only) (rear shock absorbers only) (para. 11-78).

6-66